Description
Features and Benefits
Multi Stage Booster Pumps
Some of the most durable booster pumps available. The floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal, or pump hydraulic components.
High Flow TFC Low Pressure Membranes
Additional element types & ratings available.
Pump Mounting System
The Booster Pump mounts to a separate bracket and slides onto the frame making field repairs and service easy.
300 psi FRP Membrane Housings
Gloss 300 psi Fiberglass Reinforced Plastic (FRP) Membrane Housings are standard, Stainless; Stainless Steel also available.
Key Features
- High flow 5 micron front mounted prefilter for ease of service
- Pump throttle valve & pipe mounted discharge pressure gauge
- Permeate & Concentrate flow meters
- Integrated recycle valve
- Quick connect fittings on gauges & recycle operation for ease of service
- Stainless braided hoses for protection against corrosion, leaks, & fraying
- Glycerin filled gauges for accurate & steady pressure readings
- Float switch and pretreatment interlocks - standard on all systems
- Panel mounted concentrate pressure gauge
- Low pressure mechanical switch w/time delay snubber valve
- High quality gloss 300 psi FRP housings - stainless housings available
- Replaceable schedule 80 pvc fittings for ease of field repairs
- True union couplings on inlet & outlet of motor. No plumbing disassembly required for change out
Additional Resources
OPTIONAL EQUIPMENT
Repressurization Systems - Pre-plumbed and ready to use when you receive them. These systems are custom-built to your specific application. Included in the plumbing package; 1" inlet threaded bulkhead fitting, float switch with 20ft cord, ½" overflow threaded bulkhead fitting w/plug, and 1" bulkhead fitting at the bottom of tank w/1" foot valve. All plumbing is pre-installed in your choice of storage tank size.
Bladder Tank Control - Used to charge a pressurized bladder tank instead of atmospheric storage. Used when smaller quantities of RO water are needed. Storage is restricted by pressure tank size. All controls and components are included to pressurize the bladder tank, including check valve and pressure switch.
Permeate Flush - Uses the RO permeate water for flushing foulants from the system. Soaking the RO elements during standby with permeate can help dissolve scale and loosen precipitates, reducing the frequency of chemical cleaning.
Chip Control Box - The Chip Control Box is an economical option for a RO controller available for both eh SIMPLX and NRO - 440 systems up to 4 membranes. The smaller modular design allows for easier assembly, service, and flexibility with a clean and logical layout. It features 6 LED lights to indicate the system operation of the RO unit. The controller removes the need for a low-pressure switch to control the pump and a start delay to prevent system cycling. A switching power supply operates on 96-264VAC, automatically adjusting to the operating voltage. The voltage at the supply terminals is the voltage for the pump and valves.
NRO SIMPLX SYSTEM SPECIFICATIONS | ||
MODEL | NRO-S-1440F-2500-1 | NRO-S-2440F-5000-1 |
PRODUCTION GPD | 2500 | 5000 |
MEMBRANE | 4" x 40" (1) | 4" x 40" (2) |
PERMEATE GPM | 1.73 GPM | 3.47 GPM |
FEED GPM | 6 | 7 |
% RECOVERY | 50-75% | 50-75% |
PUMP | 3/4 HP | 1 HP |
FLA 60HZ 1Ø 110/220 | 14.8/7.4 | -/9.6 |
CIRCUIT SIZE | 25/15A | -/15A |
INLET | 3/4" | 3/4" |
PERMEATE | 1/2" | 1/2" |
CONCENTRATE | 1/2" | 1/2" |
FLOOR MODEL UNIT DIMS | 22"D x 17"W x 55"H | 22"D x 17"W x 55"H |
WEIGHT - POUNDS | 97 lbs. | 125 lbs. |
MAX OPERATING PRESSURE | 160 psi | 160 psi |